Nov 03, 2024  
USC Catalogue 2024-2025 
    
USC Catalogue 2024-2025

USC Viterbi School of Engineering


Return to {$returnto_text} Return to: Programs by School

The Society for Automobile Engineers (SAE) 2023 Formula SAE Electric Vehicle (FSAE EV) competition at the Michigan International Speedway (MIS) in Brooklyn, MI.

The Society for Automobile Engineers (SAE) 2023 Formula SAE Electric Vehicle (FSAE EV) competition at the Michigan International Speedway (MIS) in Brooklyn, MI.

Photo courtesy of Viterbi School of Engineering.

 

 


The USC Viterbi School of Engineering is innovative and internationally recognized for creating new models of education, research and commercialization that are firmly rooted in real-world needs. The school’s first priorities are the education of outstanding students and the pursuit and publication of new research.

As the School’s faculty and students extend the frontiers of engineering knowledge through their research, they also apply engineering and technology to address societal challenges. The school stimulates and encourages qualities of scholarship, leadership, ambition and character that mark the true academic and professional engineer — to serve California, the nation and the world. At USC Viterbi, we call this the enabling power of Engineering+.

Courses in engineering were first offered at USC in the 1905-06 academic year in the basement of one of the oldest buildings on campus. Today, more than 300 full-time faculty, including 227 tenure-track faculty, serve about 3,000 undergraduate majors; about 1,500 students in minor programs; and about 6,850 graduate students, utilizing extensive and technically advanced laboratories, classrooms and live interactive high-speed Internet broadcast systems. Government and industry annually fund about $200 million worth of research.

Viterbi undergraduate support programs complement and strengthen the academic experience, enhancing both depth and scope. Viterbi graduate education is outstanding preparation for advanced research and professional careers. The PhD program is built around fellowships, teaching assistantships and research appointments and produces a steadily growing core of doctoral graduates across the disciplines. The master’s and professional programs are national and global leaders in advanced training for professional engineers.

The USC School of Advanced Computing , a school within the USC Viterbi School of Engineering, was established in 2024 to serve as the hub for all advanced computing research and education at USC.

Administration

Yannis C. Yortsos, PhD, Dean, Zohrab Kaprielian Chair in Engineering and holder of the Chester Dolley Professorship

Gaurav Sukhatme, PhD, Executive Vice Dean, Donald M. Alstadt Chair in Advanced Computing and Fletcher Jones Foundation Endowed Chair in Computer Science and Professor of Computer Science and Electrical and Computer Engineering (Director, USC School of Advanced Computing)

Andrea Belz, PhD, Vice Dean for Transformative Initiatives, Entrepreneur in Residence (Technology) and Professor of Engineering Practice and Industrial and Systems Engineering Practice

Kimberly Bregenzer, MA, Vice Dean for Administration and Finance

Randall Hill, Jr., PhD, Vice Dean of Engineering and Omar B. Milligan Executive Director of the USC Institute for Creative Technologies, Research Professor of Computer Science

Erik A. Johnson, PhD, Vice Dean for Academic Programs, Professor of Civil & Environmental Engineering

Craig Knoblock, PhD, Vice Dean of Engineering and Michael Keston Executive Director, USC Information Sciences Institute; Research Professor of Computer Science and Spatial Sciences

Ellis Meng, PhD, Vice Dean of Technology, Innovation and Entrepreneurship, Shelly and Ofer Nemirovsky Chair in Convergent Bioscience and Professor of Biomedical Engineering and Electrical and Computer Engineering

Mahta Moghaddam, PhD, Vice Dean for Research; Ming Hsieh Chair in Electrical and Computer Engineering-Electrophysics and Distinguished Professor of Electrical and Computer Engineering

Timothy Pinkston, PhD, Vice Dean, George Pfleger Chair in Electrical and Computer Engineering and Professor of Electrical and Computer Engineering

Cauligi Raghavendra, PhD, Vice Dean  for Global Academic Initiatives, Professor of Electrical and Computer Engineering and Computer Science

Kelly Goulis, MS, Senior Associate Dean for Admission and Student Engagement

Kaci Silverman, BA, Senior Associate Dean for Advancement

Kenneth A. Bonner, BS, Associate Dean for Inclusion and Diversity Initiatives

Michael Chung, MBA, Associate Dean of Communications and Marketing

Yolanda Gil, PhD, Director of New Initiatives in AI and Data Science, Research Professor of Computer Science and Spatial Science

 

Degrees and Accreditation

The Viterbi School of Engineering offers the following undergraduate curricula leading to the Bachelor of Science in: Aerospace Engineering; Artificial Intelligence for Business (with the Marshall School of Business); Astronautical Engineering; Biomedical Engineering (including emphases in Electrical Engineering, Mechanical Engineering, and Molecular and Cellular Engineering); Chemical Engineering (including emphases in Biological and Pharmaceutical Engineering, Energy and Sustainability Engineering, Materials Engineering, and Petroleum and Subsurface Engineering); Civil Engineering (including emphases in Building Science, Construction Engineering and Management, Environmental Engineering, Structural Engineering, and Water Resources Engineering); Computer Engineering and Computer Science; Computer Science; Computer Science/Business Administration (with the Marshall School of Business); Computer Science Games; Electrical and Computer Engineering; Environmental Engineering; Industrial and Systems Engineering; Mechanical Engineering; and Physics/Computer Science (with the Dornsife College of Letters, Arts and Sciences). The school also offers undergraduate curricula leading to the Bachelor of Arts in Data Science (with the Dornsife College of Letters, Arts and Sciences).

Minor programs are offered in: Applied Analytics; Artificial Intelligence Applications; Astronautical Engineering; Blockchain; Computer Programming; Computer Science; Connected Devices and Making; Construction Planning and Management (with the Price School of Public Policy); Craniofacial and Dental Technology (with the Herman Ostrow School of Dentistry and the Dornsife College of Letters, Arts and Sciences); Cybersecurity; Digital Forensics; Engineering Innovation for Global Challenges; Engineering Management; Enterprise Information Systems; Foundations of Data Science; Innovation: The Digital Entrepreneur (with the USC Marshall School of Business); Internet of Things (IoT) Engineering; Mobile App Development; Nanotechnology; Petroleum Engineering; Technical Game Art; Technology Commercialization (with the Marshall School of Business); Video Game Production; Video Game Programming; and Web Development.

Graduate curricula leading to the Master of Science in: Aerospace Engineering; Aerospace and Mechanical Engineering (Artifical Intelligence and Machine Learning); Aerospace and Mechanical Engineering (Computational Fluid and Solid Mechanics); Aerospace and Mechanical Engineering (Dynamics and Control); Analytics; Applied Data Science; Applied Physics; Astronautical Engineering; Biomedical Data Analytics; Biomedical Engineering; Chemical Engineering; Civil Engineering; Civil Engineering (Construction Engineering); Civil Engineering (Emerging Technologies in Construction); Civil Engineering (Transportation Systems); Civil Engineering (Water and Waste Management); Communication Data Science; Computer Engineering; Computer Science; Computer Science (Artificial Intelligence); Computer Science (Data Science); Computer Science (Game Development); Computer Science (Scientists and Engineers); Cyber Security Engineering; Electrical and Computer Engineering (Analog, Mixed-Signal and Radio-Frequency Integrated Circuits); Electrical and Computer Engineering (Hardware Systems for Machine Learning); Electrical and Computer Engineering (Machine Learning and Data Science); Electrical Engineering; Electrical Engineering (Computer Architecture); Electrical Engineering (Computer Networks); Electrical Engineering (Electric Power); Electrical Engineering (VLSI Design); Electrical Engineering (Wireless Networks); Economics and Data Science (with the Dornsife College of Letters, Arts and Sciences); Emerging Transportation Systems; Energy Engineering; Engineering Management; Environmental Data Science; Environmental Engineering; Financial Engineering; Global Supply Chain Management (with the Marshall School of Business); Health Systems Management Engineering (with the Price School of Public Policy); Healthcare Data Science; Industrial and Systems Engineering; Manufacturing Engineering; Materials Engineering; Materials Engineering (Machine Learning); Materials Science; Mechanical Engineering; Mechanical Engineering (Energy Conversion); Mechanical Engineering (Quantitative Medical Engineering); Medical Device and Diagnostic Engineering; Medical Imaging and Medical Imaging Informatics; Operations Research Engineering; Petroleum Engineering; Petroleum Engineering (Digital Oilfield Technologies); Product Development Engineering; Public Policy Data Science (with the Price School of Public Policy); Quantum Information Science; Spatial Data Science (with the Viterbi School Engineering); Sustainable Engineering; and Systems Architecting and Engineering.

Graduate curricula leading to the Master of Construction Management.

Graduate curricula leading to dual degrees in: Master of Science Aerospace Engineering / Master of Science Engineering Management; Master of Science Electrical Engineering / Master of Science Engineering Management; Master of Science Industrial and Systems Engineering / Master of Business Administration; Master of Science Mechanical Engineering / Master of Science Engineering Management; Master of Science Systems Architecting and Engineering / Master of Business Administration; and Master of Science Petroleum Engineering / Master of Science Engineering Management.

Graduate curricula leading to the Engineer degree in: Aerospace Engineering; Astronautical Engineering; Chemical Engineering; Civil Engineering; Electrical Engineering; Environmental Engineering; Industrial and Systems Engineering; Materials Science (not currently accepting applications); Mechanical Engineering; and Petroleum Engineering.

Through the Graduate School, graduate curricula leading to the Doctor of Philosophy in: Aerospace Engineering; Astronautical Engineering; Biomedical Engineering; Chemical Engineering; Civil Engineering; Computer Engineering; Computer Science; Electrical Engineering; Engineering (Environmental Engineering); Industrial and Systems Engineering; Materials Science; Mechanical Engineering; and Petroleum Engineering.

Graduate certificates in: Applied Data Science; Astronautical Engineering; Data Science Foundations; Health Systems Operations (with the USC Price School of Public Policy ); Health, Technology and Engineering (with the Keck School of Medicine); Network Centric Systems; Optimization and Supply Chain Management (with the Marshall School of Business); Software Architecture; Systems Architecting and Engineering; Technology for National Security; and Transportation Systems (with the Price School of Public Policy).

Undergraduate Program Accreditation

The Bachelor of Science degrees in aerospace engineering, astronautical engineering, biomedical engineering, chemical engineering, civil engineering, computer engineering and computer science, electrical and computer engineering, environmental engineering, industrial and systems engineering, and mechanical engineering are accredited by the Engineering Accreditation Commission of ABET, abet.org. The Bachelor of Science degrees in computer engineering and computer science and in computer science are accredited by the Computing Accreditation Commission of ABET, abet.org.

Undergraduate Program Student Outcomes

By the time of graduation from Bachelor of Science degree programs accredited by the Engineering Accreditation Commission of ABET, students will develop at least the following abilities:

  1. an ability to identify, formulate and solve complex engineering problems by applying principles of engineering, science, and mathematics
  2. an ability to apply engineering design to produce solutions that meet specified needs with consideration of public health, safety and welfare, as well as global, cultural, social, environmental and economic factors
  3. an ability to communicate effectively with a range of audiences
  4. an ability to recognize ethical and professional responsibilities in engineering situations and make informed judgments, which must consider the impact of engineering solutions in global, economic, environmental and societal contexts
  5. an ability to function effectively on a team whose members together provide leadership, create a collaborative and inclusive environment, establish goals, plan tasks and meet objectives
  6. an ability to develop and conduct appropriate experimentation, analyze and interpret data, and use engineering judgment to draw conclusions
  7. an ability to acquire and apply new knowledge as needed, using appropriate learning strategies

By the time of graduation from Bachelor of Science degree programs accredited by the Computing Accreditation Commission of ABET, students will develop the ability to perform the following:

  1. Analyze a complex computing problem and to apply principles of computing and other relevant disciplines to identify solutions.
  2. Design, implement and evaluate a computing-based solution to meet a given set of computing requirements in the context of the program’s discipline.
  3. Communicate effectively in a variety of professional contexts.
  4. Recognize professional responsibilities and make informed judgments in computing practice based on legal and ethical principles.
  5. Function effectively as a member or leader of a team engaged in activities appropriate to the program’s discipline.
  6. Apply computer science theory and software development fundamentals to produce computing-based solutions.

Viterbi Admission and Student Engagement (VASE)

The mission of Viterbi Admission and Student Engagement (VASE), located in Ronald Tutor Hall of Engineering (RTH) 110 and Olin Hall of Engineering (OHE) 106, is to support the lifecycle of all Viterbi students (bachelor’s, master’s, doctoral and executive education), providing exceptional service to students from the time they are first considering the Viterbi School to the time of completion and beyond.

The office is responsible for working with both prospective and continuing students. It directs special services and programs, provides a variety of support services, sponsors student organizations, is involved with student government and acts as a liaison with other university offices.

The office works closely with faculty and staff across our Viterbi departments and programs to coordinate admission and a range of student services and engagement programs including Viterbi Career Connections and the Center for Engineering Diversity.

Undergraduate Degrees and Requirements

Change of Major to Engineering 

USC undergraduate students interested in adding an engineering major must go through the pre-engineering process (viterbiundergrad.usc.edu/pre-engineering/). Approval is granted on the basis of academic performance at USC and the successful completion of required prerequisite courses in the Viterbi School.

Non-engineering students may complete a maximum of five engineering courses. No further engineering courses may be taken unless admission has been approved.

Common Requirements

Certain general requirements are common to all undergraduate curricula for Bachelor of Science degrees in Engineering.

General Education Requirements

The university’s general education program provides a coherent, integrated introduction to the breadth of knowledge you will need to consider yourself (and to be considered by other people) a generally well-educated person. This program requires eight courses in six Core Literacies, plus writing and two courses in Global Perspectives (which may double-count with courses in the Core Literacies). See the General Education Program  for more information.

Students in the Viterbi School of Engineering must satisfy the general education requirements. Students satisfy Core Literacy requirements in life sciences, physical sciences, and quantitative reasoning with the basic science and mathematics elements of their undergraduate engineering programs.

Students in the engineering “3-2” program are not required to satisfy general education requirements or the lower-division writing requirement for USC; these students are understood to have satisfied USC’s general education requirements when they have satisfied the general education requirements and lower-level writing requirement at their previous institution. All students must, however, complete the WRIT 340  requirement.

Mathematics 

Sixteen units or more, including three semesters of calculus, are required. Computer Science/Business Administration and Computer Science Games require two semesters of calculus.

Basic Sciences 

Twelve units or more of biology, chemistry or physics are required.

The Computer Science major and Computer Engineering/Computer Science major require 8 units of basic science. Computer Science/Business Administration and Computer Science Games require 4 units of basic science.

Residence Requirement

All students must complete a minimum of 64 units at USC in order to receive a USC degree. In addition, the Viterbi School of Engineering requires that students complete all upper-division units required for the major in residence.

For students in the Viterbi School of Engineering “3-2” Program, at least 48 units must be earned in courses taken at USC.

Scholarship Requirement in Major Subject

For graduation with a bachelor’s degree, a grade point average of C (2.0) or higher is required in all upper-division courses applied toward the major including any approved substitutes for these courses taken at USC. Additional scholarship requirements for the various majors are listed under the departmental headings.

Grade Point Requirement

A grade point average of at least 2.0 is required on all course work attempted at USC.

Transfer students must meet these averages, both on residence work attempted and on combined transferred and residence courses attempted.

Probation/Disqualification

A student whose overall GPA falls below 2.0 is placed on academic probation. Continued enrollment requires clearance from an academic review counselor.

Each semester, students on academic probation are required to receive academic advisement. Proof of advisement must be filed with the Academic Review Department before any registration requests will be processed. The only acceptable proof of advisement is an official academic review advisement record signed by the student’s academic adviser and a representative from the Viterbi Admission and Student Engagement Office. Academic review advisement forms may be obtained from Tutor Hall of Engineering (RTH) 110 or John Hubbard Hall 113.

Students on probation are encouraged to utilize the academic services (advisement and free tutoring) provided by the Viterbi Admission and Student Engagement Office. 

Students on academic probation who do not raise their overall GPA to 2.0 after two semesters of enrollment (excluding summers) will be academically disqualified from the university. However, if a student earns a minimum semester GPA of 2.3 in the second or any subsequent probation semester but has not yet reached an overall 2.0 GPA, the student will not be disqualified and will be allowed to enroll an additional semester.

Petitions for readmission after academic disqualification are initiated by the student through the Academic Review Department. All grade issues (IN, MG, etc.) must be resolved prior to the submission of such a petition. Before petitioning for readmission, a student must complete a minimum of 12 semester units of transferable course work (applicable to USC degree requirements) with a minimum 3.0 GPA. University residency requirements will determine whether these units are accepted as transfer credit.

As readmission to the university is never guaranteed, any indication of strong academic performance beyond the 12 unit minimum would strengthen a readmission petition.

Students must petition for readmission by December 30 for the spring semester, by May 1 for the summer session and by August 15 for the fall semester. Late petitions will not be accepted. A non-refundable fee determined by the Academic Review Office must accompany all readmission petitions.

Special Educational Opportunities

W.V.T. Rusch Undergraduate Engineering Honors Program

The W.V.T. Rusch Undergraduate Engineering Honors Program (EHP) recognizes select undergraduate engineering students who have excelled in their studies and completed a substantive project in engineering research or innovation. The honors project will typically result in a senior thesis or a commercialization plan and will be pursued under the supervision of a faculty mentor. While completing the honors project, students can choose to receive course credit (e.g., via department directed research 490 course, ENGR 400 , or similar), or conduct research through extracurricular means (e.g. volunteer or compensated research).

To apply for the EHP, students must have earned at least a 3.5 USC GPA after at least one semester of USC course work and have at least three semesters remaining at USC. To graduate with Engineering Honors, and for it to be noted on their academic transcripts, students must meet certain requirements, including: earn at least a 3.5 cumulative USC GPA, complete two semesters of ENGR 100a  Engineering Honors Colloquium, and complete an accepted senior thesis or commercialization plan. For more information, visit: viterbiundergrad.usc.edu/ehp/.

Engineering Grand Challenges Scholars Program

The Engineering Grand Challenges Scholars Program (GCSP), co-founded by USC Viterbi in 2009, encourages students to develop mindsets and competencies that will enable them to pursue solutions to pressing problems, as articulated in the 14 Grand Challenges for Engineering. Such Grand Challenges span four wide areas, from sustainability (e.g., making solar energy economical) to security (e.g., securing cyberspace), health (e.g., reverse engineering the brain) and joy of living (e.g., engineering the tools of scientific discovery).

A Viterbi student may graduate with Designation as an Engineering Grand Challenges Scholar (GCS), which would be noted on academic transcripts by submitting an application that documents the student’s involvement related to one of the 14 Grand Challenges, and the development of mindsets and competencies in the following five areas: talent/research, multidisciplinarity, viable business and entrepreneurship, multicultural awareness, and societal consciousness. Students typically begin their GCSP involvement during their first years at USC, developing the competencies over the course of study in Viterbi and submit, during their senior year, a formal application for the GCS Designation. For more information, please visit: viterbiundergrad.usc.edu/gcsp/.

Viterbi Fellows Program

Every year, a select group of promising incoming first-year students is invited to join the Viterbi Fellows Program. The program provides pathways and opportunities to maximize their potential and develop as community leaders starting in their first semester. Fellows engage in a combination of opportunities and experiences, both academic and co-curricular. 

Each Viterbi Fellow receives a Merit Research Award to get involved in research with our faculty from their first semester. In addition to giving students excellent first-hand experience, these awards can help offset the cost of education since each participant earns wages for his or her work. In addition, Viterbi Fellows receive a small living stipend to support their educational expenses. Viterbi Fellows are also granted priority consideration for many of the Viterbi School programs, including iPodia, international maymester and fall-lead programs, and career-related programs. Fellows also receive special invitations to events such as the Fellows’ Dinner with the Dean, and co-curricular events.

Honor Societies

The Viterbi School of Engineering has established a variety of honor societies to recognize academic excellence, creativity, and service. These are: Alpha Pi Mu (industrial and systems engineering), Chi Epsilon (civil engineering) and Tau Beta Pi (engineering honor society).

3+2 Program

The Viterbi School of Engineering has developed agreements with a number of liberal arts colleges nationwide in which a student attends a liberal arts institution for their first three years of college, pursuing pre-engineering courses in addition to a solid program in the liberal arts or sciences. At the end of the three years, upon recommendation from the liberal arts college, the student applies to the Viterbi School of Engineering as a transfer student. If admitted, they can complete the remaining requirements for a BS degree typically within two years. After degree requirements for both schools are complete, the student will receive two degrees — a BA from the liberal arts college and a BS in engineering or computer science from USC.

International Exchange Programs

The Viterbi School of Engineering International Exchange Program gives undergraduate students the opportunity to broaden their exposure to the global context of engineering theory and practice by spending a semester abroad in a challenging academic environment at an international host institution. The International Exchange Program allows students to satisfy technical electives and/or approved degree requirements by attending approved partner institutions. This program is open to students entering their junior or senior year. Students apply at the Viterbi Student Engagement Office. Candidates must meet all admission requirements of both the Viterbi School of Engineering as well as those of the international host institution. Contact the Viterbi Admission and Student Engagement (VASE) Office for a complete list of international exchange partners.

Viterbi Maymester and Fall Lead Programs

The Viterbi School of Engineering Maymester and Fall Lead programs allow students to go abroad for 2-3 weeks before the fall semester begins or after the spring semester ends. Students will complete the majority of the course on-campus during the semester and use the two weeks abroad to inform the course content and assignments by looking at specific engineering topics from a global perspective.

Center for Undergraduate Research in Viterbi Engineering

The Center for Undergraduate Research in Viterbi Engineering (CURVE) provides a centralized resource for undergraduate students to explore research opportunities in Viterbi early on in their undergraduate career. The goals of CURVE are to engage Viterbi students in research and mentoring communities, prepare students with skills to access the field of engineering or computer science, and provide students funding while they gain experience on a faculty-led research project. 

CURVE matches Viterbi undergraduate students with research labs and provide an annual stipend.  Participating students will present their research at the end-of-year Viterbi Undergraduate Research Symposium. Additional benefits include professional development seminars on topics such as conducting literature reviews, delivering effective presentations, designing technical posters, best practices in research, writing scientific abstracts, applying to PhD programs and more.

For more information, visit: viterbiundergrad.usc.edu/research/curve/.  

VASE Academic Services and Engagement

Center for Engineering Diversity

Established in 1975, the Center for Engineering Diversity (CED) strives to increase the representation of African-American, Latino and Native American engineers who are equipped to be ethical, global-minded, innovative leaders. 

Our mission is to build a community of authentic engineers through programs and services that promote professional development, support academic excellence and develop leadership skills.

Visit the website for the Center for Engineering Diversity

Women in Engineering Program (WIE)

The Women in Engineering Program (WIE) offers professional, academic and co-curricular support to the women of the Viterbi School. The goal of the Viterbi Women in Engineering Program is to recognize the unique challenges that women engineering students face, provide resources and overall support to address these challenges. WIE’s mission is to recruit and retain women engineers and to empower our female students to find academic and personal success during their Viterbi career and beyond.

Contact the Women in Engineering Program at (213) 740-4530 for more information.

Klein Institute for Undergraduate Engineering Life

The Klein Institute for Undergraduate Engineering Life (KIUEL) was established to provide Viterbi undergraduates with a variety of personal and professional activities designed to enhance student life experiences outside the classroom. The KIUEL Programming Board implements programs around community, leadership, engagement, and service. Past KIUEL events include: KIUEL Viterbi Presidents Council Leadership Retreat, Engineers Week (E-Week), KIUEL Down to Finals and Professor Coffee Hours. ​

Viterbi Career Connections

The Viterbi School of Engineering provides extensive career services to all students. We recommend that students frequently engage in co-curricular activities combined with their academic programs to compete in the job market more successfully. Students are encouraged to update their profile information and career interests with Viterbi Career Connections at least once per year via the Viterbi Career Gateway portal. By doing so, they will be kept informed of all career-related events such as company information sessions, career and internship expos, job and internship postings, professional development workshops, industry luncheons, networking events, and more. Additionally, with an updated profile, students can participate in the Viterbi School’s extensive on-campus recruitment activities.

Viterbi graduates go places! USC’s Viterbi School of Engineering attracts employers from Southern California and across the country and the world. Find out more about where Viterbi students find employment by visiting viterbicareers.usc.edu/firstdestination/. A small sample of the many companies that have recently hired co-ops, interns, and full-time employees from the Viterbi School include: Abbott Laboratories; Accenture; Adobe Systems Inc.; Amazon Corp. LLC; Apple; Bloomberg L.P.; Blue Origin; The Boeing Company; Chevron; Citrix Systems, Inc.; Deloitte Financial Advisory Services; Edwards Lifesciences Corp.; Ernst & Young, Facebook, Inc., General Atomics-Aeronautical System Inc., General Electric, Goldman Sachs; Google, Intel Corp., IBM, Intuit, Inc., Jet Propulsion Laboratory, Juniper Networks, Inc., KPMG; LinkedIn, Lockheed Martin Corporation, Medtronics, Inc., Microsoft Corporation; NASA; Northrop Grumman Corporation; Oracle Corp.; Qualcomm; Raytheon Company; Salesforce.com, Inc.; Snapchat; SpaceX; Symantec Corp.; Tesla; The Aerospace Corp.; TikTok; Turner Construction; U.S. Air Force; Verizon Media, Visa Inc.; Walt Disney Imagineering.

Cooperative Education

Students can earn degree credit and industry work experience by participating in the Co-op/Internship Program before they graduate. Co-ops and internships improve students’ understanding of the relationship between theory and practice, helps them fine-tune their career goals, and aids in acquiring essential engineering skills. Students’ work assignments are closely related to their specific degree program and are appropriate to their current academic level.

Participation in co-op and internship programs is open to all bachelors, master’s, and doctoral engineering students. Undergraduate students are eligible to apply for the co-op course in the second semester of their sophomore year. Master’s and Doctoral students are typically eligible for an internship course after maintaining full-time student status for one regular academic year. While on assignment, students enroll in a 1–2 unit course (ENGR 395ax , ENGR 596 , ENGR 597x  or ENGR 598 ) that aids in integrating on-campus and off-campus learning. With departmental approval, students may earn credit toward a degree upon completion of this course.

Graduate Degrees and Requirements

General Requirements

The Viterbi School of Engineering recommends candidates for the Master of Science degree and the Master of Construction Management. 

All graduate work in the Viterbi School of Engineering is under the jurisdiction of the Viterbi School except the Doctor of Philosophy degree, which is under the jurisdiction of the USC Graduate School. All prospective graduate engineering students should apply to the USC Office of Graduate Admission.

Admission

Two classes of students are admitted to take courses for graduate credit: admitted and conditionally admitted students. These classifications are determined by the Office of Graduate Admission on the recommendations of the appropriate department in the Viterbi School of Engineering.

Admitted Students

This is the status of a graduate student pursuing work leading toward an advanced degree. The student has been accepted into the degree program without any conditions.

Conditionally Admitted

The chair of a major department in the Viterbi School of Engineering may recommend that a student be admitted under certain conditions. Conditional admission is granted when a student’s admission records are incomplete or when deficiency courses must be taken but the student appears to be otherwise admissible. The conditions must be met before the completion of two semesters of enrollment or 12 units of course work, whichever comes first. If the conditions on admission are not met within the given time period, the student may not be allowed to register for course work in subsequent semesters. When the conditions have been met, the academic department will remove the restrictions that have been placed on the student’s registration.

Criteria

To qualify for admission, applicants are expected to present strong academic records and show superior accomplishment in their engineering and related courses. Admission decisions will be based on Graduate Record Examinations test scores and transcripts of previous school work. Individual departments may set higher admission standards than the Graduate School. Some programs also require letters of recommendation and a statement of purpose. Doctor of Philosophy applicants who have published professional papers in their field may forward copies to the department, and they will be considered together with the other credentials submitted.

Procedure

Applicants to graduate programs must present credentials to the Office of Graduate Admission showing that they have completed an acceptable curriculum for the bachelor’s degree. In some departments, students with outstanding records will be admitted for the doctoral program without first receiving the Master of Science degree. If the previous degree is not in the field in which the student wishes to pursue graduate study, it may be necessary to make up undergraduate deficiencies in the area of the desired specialty. Applicants must take the Graduate Record Examinations. Satisfactory scores on the general test are required for admission to full graduate standing in most programs. Consult the department office for further information.

Once the application for admission has been sent, arrangements should be made immediately to have official transcripts of all previous undergraduate and graduate school work forwarded directly to the Office of Graduate Admission from the schools attended. If the Graduate Record Examinations general and subject tests, as well as the TOEFL or IELTS exams, have been taken the scores should be sent to the Office of Graduate Admission by the educational testing service. If the tests have not been taken, the applicant should register to take them on the earliest available date. The departments will review the application files and select for admission those students offering the greatest promise for completing graduate studies.

Progressive Degree Programs

The progressive degree program allows qualified undergraduate students the opportunity to complete an integrated program of study joining a bachelor’s degree program and a master’s degree program in the same or different departments. Applicants for a progressive degree program must have completed 64 units of course work applicable to their undergraduate degree since graduating from high school. (Credit by exam and course work taken prior to high school graduation are excluded). Applicants can submit their application at any time after completion of 64 units but it is highly recommended that applications are submitted in the fall semester of the third year of enrollment at USC. The application for admission to a progressive master’s program must be accompanied by a departmentally approved course plan proposal. Letters of recommendation may be required for some applicants depending upon their GPA at the time of application. Comprehensive information including how to apply can be found at viterbiundergrad.usc.edu/future/pdp/.

Progressive degree program students must fulfill all the requirements for both the bachelor’s degree and the master’s degree. The total number of units for the master’s degree, however, may be reduced by a maximum of one-third. A minimum of two-thirds of the units required for the master’s degree must be at or above the 500 level. Students will be subject to undergraduate academic progress standards and policies while in undergraduate status and master’s academic progress standards and policies while in graduate status. The degrees may be awarded separately, but the master’s degree will not be awarded before the undergraduate degree. The time limit for completing a progressive degree program is 12 semesters. For more information, refer to the Requirements for Graduation  page.

General Requirements for the Master of Science

Residence Requirements

Viterbi students are allowed up to five years to earn a master’s degree. Depending on the specific degree, the typical time required varies from between one and one-half to two years for students in MS programs on campus to three years for MS students completing their degrees online via DEN@Viterbi. Master’s degrees other than the Master of Science typically require more course work and may take more time to complete.

Students entering the Viterbi School of Engineering with course or credit deficiencies require a correspondingly longer period. A candidate must complete the last four semester units of course work at USC. No more than 25 percent of the minimum units required for the program will be accepted from another engineering school upon verification by the Office of Degree Progress and the approval of the major department.

Prerequisites

Prerequisite is a bachelor’s degree in engineering, allied fields or science. If the graduate field is different from the field of the bachelor’s degree, there may be undergraduate deficiencies assigned by the major department, and these must be made up by taking and passing the assigned courses before proceeding with the graduate courses.

Deficiency Courses

New students may be required to demonstrate satisfactory preparation for the graduate program with previously completed course work. In cases where preparation is not demonstrated, up to 9 units of deficiency course work may be required in addition to the normal degree requirements.

Credit for required deficiency courses may not be applied toward a graduate degree. A deficiency course within the same discipline taken after the higher-level course has been passed will not be available for unit or grade point credit.

Placement Examinations

Enrollment in certain 500- and 600-level courses in the disciplines of computer engineering and electrical engineering will require a student to either take and pass the corresponding 400-level prerequisite at USC, or pass a placement exam in the corresponding course.

Not all 400-level prerequisite courses taken instead of a placement exam are available for degree credit. No unit or grade point credit is given for placement exams. Please consult with an academic adviser or refer to the department website for information on specific courses and placement exam details.

Grade Point Average Requirements

A grade point average (GPA) of 3.0 (A = 4.0) is required for the master’s degree in all engineering programs. The minimum GPA must be earned on all course work applied toward the master’s degree and on all 400-level and above course work attempted at USC beyond the bachelor’s degree. A minimum grade of C (2.0) is required in a course to receive graduate credit. Work graded C- or below is not acceptable for subject or unit credit toward any graduate degree. Transfer units count as credit (CR) toward the master’s degree and are not computed in the grade point average.

Course Selection

There are two program options for the master’s degree, one with a thesis and the other without. Courses are selected to fit the special needs of individual students, must form an integrated program leading to a definite objective and must be approved in advance by the department. Only courses numbered 400 and above may be applied for degree credit.

Program without Thesis

The minimum requirement is 27 units; 18 of these units must be at the 500 level and at least 18 units must be in the major department and closely related departments. Prior department approval is required for all non-major courses. Specific requirements are listed under each department.

Program with Thesis

The minimum requirement is 27 units; 4 of these units are to be thesis. At least 16 units, not including thesis, must be at the 500 level or higher, and at least 18 units must be in the major department. Two units of 594a and 2 units of 594b are required. No more than 4 units of 590 Directed Research is permitted.

Master’s Thesis

The thesis, when it is required, is regarded as an important part of the work of the candidate for a master’s degree. It must be a serious, considerable and publishable piece of work demonstrating the writer’s power of original thought, thorough grasp of the subject matter and ability to present material in a scholarly manner and style.

The thesis presents the results of an investigation of an approved subject in the major department. It is supervised throughout by a thesis committee, appointed by the chair of the student’s major department. The committee is usually composed of two members of the major department and one other member of the faculty.

The student will register in courses 594a and b respectively during the final two semesters of the master’s program as determined by discussion with an adviser. (Concurrent registration for 594a and b during the same semester is permitted when a student’s progress makes completion of all requirements likely within one semester.) If the thesis has not been completed within these two semesters, the candidate must register for 594z each semester until the thesis has been accepted but no additional unit credit will be earned. Units of 594ab Master’s Thesis may not be converted to units of 590 Directed Research.

A student readmitted to candidacy by petition to the Graduate School must reregister for 594a and 594b. Final acceptance of the thesis is based upon the recommendation of all members of the thesis committee. For requirements concerning format of master’s thesis see The Graduate School  section of this catalogue.

Candidates who find it necessary to be excused from registration in 594a or 594b for a semester must formally report before the beginning of the semester to the Viterbi Admission and Student Engagement Office that they will be inactive during that semester and request a leave of absence. During a leave of absence, a candidate will not be entitled to assistance from the thesis committee or to the use of university facilities. The granting of a leave of absence does not change the candidate’s responsibility for meeting the time schedule for the completion of degree requirements. Leave will be granted only under exceptional circumstances.

Progress Toward the Degree

Master’s students are expected to make regular progress toward their degrees as defined by the faculty of their respective departments and within the time limits allowed. Master’s students’ progress and performance are reviewed each semester. Students making unsatisfactory progress, with an overall GPA below 3.0, are placed on a semester of academic warning. Please refer to “Academic Warning and Dismissal” in the Catalogue section General Requirements for Graduate Degrees , the Catalogue section Grade Point Average Requirements , and the Viterbi Admission and Student Engagement (VASE) website at viterbigrad.usc.edu.

Department Approval for Non-major Courses

Prior departmental approval is required for non-major courses to be taken and applied toward a graduate degree. Students must consult with the faculty adviser for formal written permission to take courses outside the major department for degree credit.

A copy of the faculty adviser’s written approval must be kept in the department file and retained by the student until graduation.

Time Limit

It is expected that work for a Master of Science in Engineering will be completed within a maximum of five calendar years. An academic department may grant an extension of up to one year at a time for a maximum of two years. Courses taken more than seven years prior to the date upon which the degree is to be awarded cannot be included for the degree.

Admission to Candidacy

Application for admission to candidacy for the Master of Science is a separate step from admission to graduate standing. The requirements for admission to candidacy are: (1) the applicant must be admitted to regular graduate standing and must have removed all undergraduate deficiencies, and (2) the applicant must submit a complete program approved by the major department showing the course work, research and thesis (if required).

Application for graduation should be made at the beginning of the semester in which the requirements for the master’s degree are to be completed. Students are strongly advised to file for graduation as soon as the registration process has been completed so that their names may appear in the printed Commencement program and so that any discrepancies in their records may be resolved. Late filing may delay conferral of the degree.

Application forms for graduation with the master’s degree may be obtained from the student’s academic department. This application should be returned to the student’s academic department. Changes in the program after admission to candidacy are made by petition to the student’s academic department.

Second Master’s Degree

A graduate student who already holds a master’s degree from USC may apply a limited number of previously earned units toward the second master’s degree.

The maximum number of units that may be applied toward the second master’s degree for course work taken from a first master’s degree at USC is no more than 25 percent of the minimum units required for the program. In all cases, the permission of the chair of the major department is required. All credit, including the units from the first master’s degree, must be earned within seven calendar years.

For students who earned their first master’s degree at another institution, no course work may be repeated from the first program of study and no unit credit from the first program of study may be counted toward the second master’s degree.

General Requirements for the Master of Engineering Degree

The Viterbi School does not currently offer degree programs with the Master of Engineering designation.

General Requirements for the Engineer Degree

The Engineer degree is awarded under the jurisdiction of the Viterbi School of Engineering. This degree is granted upon completion of a comprehensive curriculum beyond the general course requirements for the Master of Science and after successfully passing an engineer’s qualifying examination. The required curriculum is intended to give students broad preparation in two areas of engineering, together with a minimum number of units in these areas to prepare them for the interdisciplinary nature of the many complex problems they will encounter in practice today. The degree is also intended to fulfill a growing need in industry for students with comprehensive advanced engineering training, but not necessarily with the research orientation developed by the PhD student.

The Engineer degree is a terminal degree. Students who complete the Engineer degree will not be considered for admission to the PhD program.

The Engineer degree is offered in aerospace engineering, astronautical engineering, chemical engineering, civil engineering, electrical engineering, environmental engineering, industrial and systems engineering, materials science, mechanical engineering and petroleum engineering.

Prerequisites

There are three basic prerequisites for the Engineer Degree Program: a Master of Science degree or completion of 27 units of acceptable course work, application for admission to the Viterbi School of Engineering and acceptance to the program by the appropriate department.

Course Requirements

The Engineer degree requires a minimum of 30 units of graduate course work beyond the Master of Science degree; up to 6 units at the 400 level may be counted at the discretion of the student’s qualifying exam committee if the committee finds them necessary for the student’s program. The course work must form a balanced program of study leading to a definite concentration in two fields of engineering, a minimum of 12 units in one field, nine in another; nine units are elective and may be taken outside the Viterbi School of Engineering, but must be acceptable for graduate credit. The distribution of course work will be governed by the student’s qualifying exam committee and should be considered in conjunction with the course work done for the Master of Science degree. A candidate for the Engineer degree may substitute a project under the supervision of a faculty member for 6 units of course work. To have the project credited toward the degree, the student must register in 690 Directed Research during the course of the project; total 690 Directed Research registration should not exceed 6 units. A student wishing to work on a project must make arrangements with a member of the faculty to supervise and evaluate work, and obtain the approval of the committee chair prior to completing more than 15 units of course work. In many cases, the project may be related to the candidate’s work outside the university but must still be supervised by a faculty member. Distribution of the course work should take into account the nature of the project.

Grade Point Average Requirement

A minimum grade point average of 3.0 must be earned on all course work applied toward the Engineer degree. This average must also be achieved on all 400-level and above course work attempted at USC beyond the bachelor’s degree. A minimum grade of C (2.0) is required in a course to receive graduate credit. Work graded C- or below is not acceptable for subject or unit credit toward any graduate degree. Transfer units count as credit (CR) toward the Engineer degree and are not computed in the grade point average.

Residence Requirements

A candidate must complete the last 4 units of course work at USC. At least 26 units must be taken in residency at USC. A maximum of 4 transfer units not counted toward a previous degree may be allowed with adviser approval.

Guidance Committee

After being granted graduate standing, the student must form a guidance committee. The committee is made up of three full-time faculty members who are specialists in the student’s areas of concentration, with at least two from the major department. Forms to appoint the committee are available from the student’s academic department. The student is responsible for finding a faculty member from one area of concentration who will act as the chair of the guidance committee. The chair will assist in selection of the other members. Advisement of the student after formation of the committee will be by the committee chair.

Qualifying Examination

The student must satisfactorily complete an engineer’s qualifying examination administered by his or her guidance committee. This examination will cover both areas of concentration and will consist of at least one written and one oral examination. This examination is normally taken during the last semester of course work toward the degree. Students who choose to take the examination in the semester following the completion of course requirements may do so up until the end of the third week of classes without registering. After that date, they must register for GRSC 810  to maintain continuous enrollment in the program. Results of the examination are reported to the Viterbi Office of Graduate and Professional Programs and forwarded to the Office of Academic Records and Registrar.

Transfer Credits

Up to 4 units of graduate course work may be transferred from an accredited institution to be applied toward the Engineer degree. Transfer work must have been done after receipt of the Master of Science degree and must be approved by the qualifying exam committee.

Reserving Course Credit

A student who receives the Master of Science degree at USC may reserve a limited number of units taken prior to the receipt of the Master of Science degree for credit toward the Engineer degree. To reserve credit, the course must have been taken during the last semester as a Master of Science candidate, not used toward the Master of Science degree, be acceptable to the student’s committee, and approved by the Office of Degree Progress.

Time Limit

The student must complete all requirements within five calendar years.

Admission to Candidacy

After satisfactorily completing the qualifying examination, and no later than the beginning of the last semester of course work, the student must file for candidacy. This is a separate and distinct step which sets forth the entire academic program fulfilling the degree requirements and is used as a working basis for awarding the degree.

General Requirements for the Doctor of Philosophy

This degree is granted under the jurisdiction of the The Graduate School . Students should also refer to the Requirements for Graduation  section and The Graduate School section of this catalogue for general regulations. All courses applied toward the degree must be courses accepted by the Graduate School.

Thirteen Doctor of Philosophy (PhD) programs are offered: aerospace engineering, astronautical engineering, biomedical engineering, chemical engineering, civil engineering, computer engineering, computer science, electrical engineering, engineering (environmental engineering), industrial and systems engineering, materials science, mechanical engineering and petroleum engineering.

Deficiency Courses

New students may be required to demonstrate satisfactory preparation for the graduate program with previously completed course work. In cases where preparation is not demonstrated, up to 9 units of deficiency course work may be required in addition to the normal degree requirements.

Credit for required deficiency courses may not be applied toward a graduate degree. A deficiency course within the same discipline taken after the higher-level course has been passed will not be available for unit or grade point credit.

Placement Examinations

Enrollment in certain 500- and 600-level courses in the disciplines of computer engineering and electrical engineering will require a student to either take and pass the corresponding 400-level prerequisite at USC, or pass a placement exam in the corresponding course.

Not all 400-level prerequisite courses taken instead of a placement exam are available for degree credit. No unit or grade point credit is given for placement exams. Please consult with an academic adviser or refer to the department website for information on specific courses and placement exam details.

Foreign Language Requirements

There is no foreign language requirement for engineering majors.

Course Requirements

Satisfactory completion of at least 60 units of approved graduate-level course work with a cumulative grade point average of at least 3.0 is required of all PhD students in engineering. A minimum grade of C (2.0) is required in a course to receive graduate credit. Work graded C- or below is not acceptable for subject or unit credit toward any graduate degree. Undergraduate prerequisites and graduate course work will be required in accordance with the regulations of the major department or program and the recommendations of the student’s qualifying exam committee. Transfer units are subject to approval by the Office of Degree Progress (for course work taken at institutions in the United States) or by the Office of Graduate Admission (for course work taken at institutions outside the United States) and by the qualifying exam committee.

Screening Procedure

The original admission decision admitting a student to the PhD program is based on the student’s previous academic records, Graduate Record Examinations scores and other evidence of scholastic abilities indicating promise for completing graduate studies. It is also a prerequisite that all PhD students successfully complete the screening procedures designated by the department. These usually consist of a written and an oral examination administered by the faculty. Students who fail the screening procedure will be advised that they are not recommended to continue in the PhD program and that any additional work may not be counted toward the degree.

Qualifying Exam Committee

The PhD student’s program of study is supervised by the qualifying exam committee, which is formed immediately after passing the screening examination. The committee consists of five members, composed of the following: at least three USC faculty members (the committee chair plus at least two others) with appointments in the student’s major department, of which at least one must be tenured; and at least one USC faculty member—denoted the “outside member”—with primary appointment outside the major department. These four committee members must have, and the fifth committee member usually has, a USC appointment (tenured/tenure-track faculty or approved research faculty) that makes them eligible to chair a PhD committee. Upon written request of the committee chair, and with a curricula vita that demonstrates a professional profile suitable for supervising PhD research, the fifth member may be a USC researcher or an “external member” from outside USC. The forms to appoint the committee are obtainable from the VASE website.

Qualifying Examinations

The qualifying examinations are taken during the last semester of the second year of graduate study or, at the latest, in the fifth semester or equivalent. The request to take the Qualifying Examinations must be filed in the semester prior to taking the examinations and at least 30 days before beginning the examinations. The examinations are intended to determine the extent of the student’s knowledge in basic science and engineering areas as well as the ability to do original and scholarly research. The qualifying exam committee decides the nature of the qualifying examinations (both oral and written portions) according to the policies applicable in each department.

If not otherwise enrolled, a student must enroll in GRSC 800  during the semester in which the qualifying examination is to be taken. Students are strongly encouraged to take the qualifying examination during the first semester in which they are enrolled in Studies for the Qualifying Examination, and may not enroll in more than two semesters of Studies for the Qualifying Examination before taking the qualifying examination.

The examinations may be scheduled at any time during the semester provided that all members of the committee are available to administer them. All portions of the examinations must be completed within 60 days. After passing the qualifying examinations the PhD student is admitted to candidacy by the Graduate School and the dissertation committee is established. After this step, students will normally engage in at least one year of full-time graduate study and research on campus.

Doctoral Dissertation

An acceptable dissertation based on original investigation and supervised directly by the dissertation committee is required. The dissertation must show mastery of a special field, capacity for independent research and a scholarly result. Candidates are expected to keep all members of the dissertation committee informed of their progress at all stages of the dissertation.

Dissertation Committee

The dissertation committee must include: at least two USC faculty members (the committee chair plus one other) with appointments in the student’s major department, of which at least one must be tenured; and at least one USC faculty member—called the “outside member”—with primary appointment outside the major department. These three committee members must have a USC appointment (tenured/tenure-track faculty or approved research faculty) that makes them eligible to chair a PhD committee. Additional committee members who do not meet that criterion (other USC faculty or researcher, or an external member from outside USC) may be included, upon written request of the committee chair and with a curricula vita that demonstrates a professional profile suitable for supervising PhD research. The dissertation committee may include the same five members as the PhD qualifying exam committee.

Defense of the Dissertation

After satisfactorily meeting all other requirements and after the research and writing of the dissertation are substantially complete, the PhD candidate must pass a general final oral examination devoted to the major field and to the topic of the dissertation. The examination will be conducted in such a manner as to determine to the satisfaction of the dissertation committee that the candidate has attained the stage of scholarly advancement and power of investigation demanded by the university for final recommendation to the doctorate. The faculty are invited to attend and to participate in the final oral examination. However, only the dissertation committee may vote. Unanimous approval of the committee is required for the student to upload the dissertation to the Graduate School.

Departmental Requirements

The requirements and regulations set forth in this portion of the catalogue are to be construed as the minimal requirements only as established by the Graduate School. In addition, students must meet all the requirements established by their department.

Progress Toward the Degree

PhD students are expected to make regular progress toward their degrees as defined by the faculty of their respective departments and within the time limits allowed. PhD students’ progress and performance are reviewed biannually. At the beginning of the fall and spring semesters, each Viterbi PhD student must submit a scholarly activity and accomplishments report, which is reviewed by the student’s faculty adviser(s) and a committee composed of program faculty. Students making unsatisfactory progress, as determined by the program faculty, receive a formal written warning and are placed on a semester of academic warning with specific conditions to be met for continuation in the program. Please refer to “Academic Warning and Dismissal” in the Catalogue section General Requirements for Graduate Degrees , the Catalogue section Grade Point Average Requirements , and the Viterbi Admission and Student Engagement (VASE) website at viterbigrad.usc.edu.

Special Educational Opportunities

DEN@Viterbi

Established in 1972, DEN@Viterbi, the USC Viterbi School of Engineering’s online delivery system is a pioneer in the distance learning arena, using cutting-edge technology to enable professional engineers to take USC engineering courses for graduate degree credit without coming to the campus. DEN@Viterbi students enrolled around the world are pursuing over 40 graduate degree programs online — more choices than at any other research university. DEN@Viterbi breaks down geographical and scheduling barriers, allowing students to take classes anytime and anywhere, with the option for live interactivity. DEN@Viterbi students receive support from administrative and technical staff, and enjoy access to all services the Viterbi School has to offer.

The Viterbi School has made it possible for on-campus students enrolled in DEN@Viterbi (online) courses to receive free access to the archived online course lectures. This valuable study aid enables students to review lectures throughout the semester.

For more information about graduate programs available online via DEN@Viterbi, please visit viterbi.usc.edu/den.

Return to {$returnto_text} Return to: Programs by School